Quick Start Guide - Garrett CSI PRO Instruction Manual

1. Install batteries.
The CSI Pro operates with four (4) AA batteries which are
already installed by Garrett.
2. Power ON.
Press and release the ON / OFF Power button. The CSI Pro
powers on in the last mode used and is ready to search.
(Factory default mode is Coins.)
3. Select Mode.
Use the mode Pushbutton to select a different detection
mode, when desired.
4. Adjust settings.
Adjust Sensitivity or Discrimination settings, if desired.
5. Begin scanning.
Lower the searchcoil to about 1 inch above the ground and
scan the coil left and right at approximately 3 feet/second.

QUICk START GUIDE

5
CSI Pro™