At Gold Control Panel; Quick Start Guide - Garrett AT Gold Owner's Manual

AT GOLD CONTROL PANEL

Target ID
Legend
indicates
metal types.
Digital
Target ID
High Resolution
(also shows
Iron Discrimination ground balance
indicates level of iron
settings while in
discrimination selected.
GND-BAL mode.)
Mode
Indicator
Sensitivity
Setting
Iron Disc
Pushbutton
to change iron
Iron Audio
discrimination level.
Pushbutton
to toggle Iron
Audio ON/OFF.
hold 1 second
ON / OFF Power:
to turn power on/off.
press quickly to toggle
MODE:
through detection modes
.
hold 5 seconds to restore
RESET:
factory settings.
SENSITIVITY
Pushbutton
to change sensitivity
4 Garrett Metal Detectors
Lower Scale
indicates notch
Target ID
discrimination pattern.
Cursor
indicates
probable
target identity.
Depth Indicator
indicates depth of a
coin-sized target
Battery Level
PINPOINT
Indicator
Pushbutton
Press and hold
GROUND BALANCE
to pinpoint.
Pushbutton
Press and hold for fast auto
ground balance or use with
FREQ
THRESHOLD (+) or (-) for
Pushbutton
manual ground balance.
to toggle through
4 frequencies.
THRESHOLD Pushbutton
to change the level of
background sound
.
.
1. Install batteries.
The AT Gold operates with four (4) AA batteries which are
already installed by Garrett.
2. Power ON.
Press and release the ON / OFF Power button. The AT Gold
.
powers on in the last mode used and is ready to search.
(Factory default mode is ALL METAL.)
3. Select Mode.
Use the Mode Pushbutton to select a different detection
mode, if desired.
4. Adjust settings.
Adjust Sensitivity or Discrimination settings, if desired.
5. Begin scanning.
Lower the searchcoil to within 1" (2.5cm) of the ground and
scan the coil left and right at approximately 3 feet (1m)
per second.

QUICK START GUIDE

AT Gold
5
™