ACE 200 CONTROL PANEL
Target ID Legend
indicates metal types.
Digital
Target ID
Mode
Indicator
Low Battery
Level
Indicator
MODE
Button
selects detection mode (i.e.
discrimination pattern).
2
Garrett Metal Detectors
Target ID Cursor
indicates probable target identity.
Depth
Lower Scale
Indicator
indicates notch
discrimination
indicates depth
pattern.
of coin-sized
target.
SENSITIVITY
Sensitivity
Button
Setting
increases or decreases
sensitivity.
Power ON / OFF:
hold 5 seconds for
Factory Reset.
QUICK START GUIDE
1. Power ON.
Press and release the ON / OFF Power button. The ACE 200
powers on in the last mode used, automatically adjusts for
ground minerals and is ready to search. The detector
operates with four (4) AA batteries which are already
installed by Garrett.
(Factory default mode is Coins.)
2. Select Mode.
Use the Mode button to select a different detection mode,
when desired.
3. Adjust settings.
Adjust Sensitivity setting, if desired.
4. Begin scanning.
Lower the searchcoil to approximately 1 inch above the
ground and scan the coil left and right at approximately
3 ft/second. The coil must be in motion for target
detection.
3
ACE 200
™