Table of Contents
Advertisement
Safety
1.
Read and understand the contents of this
Operator's Manual, and the Operator's Manual
for the HydroJect 3000 Aerator before
operating the machine. Become familiar with all
controls and know how to stop quickly. Free
replacement manuals are available by sending
the complete Model and Serial Number to:
The TORO Company
8111 Lyndale Avenue South
Bloomington, Minnesota 55420
2.
Keep all shields and safety devices in place. If a
shield, safety device or decal is damaged or
missing, repair or replace it before operating the
machine. Also tighten any loose nuts, bolts or
screws to ensure that the machine is in safe
operating condition.
3.
Wearing safety glasses, safety shoes, ear
protection and a helmet is advisable and required
by some local ordinances and insurance
regulations. Always wear goggles and other
protective equipment as recommended by the
chemical manufacturer.
4.
Never use additives in the water supply system
other than those listed in this manual as
recommended and approved.
5.
Make sure all hydraulic line connectors are tight,
and all hydraulic hoses and lines are in good
condition before applying pressure to the system.
6.
Make sure all waterline connectors are tight, and
all water and additive hoses and lines are in good
condition before applying pressure to the system.
7.
Before disconnecting or performing any work on
the water system, relieve all pressure in the
system by stopping the engine and opening the
bleed valve. Opening the bleed valve allows any
trapped water to escape from the system, and
also allows the accumulator piston to move to
the bottom of the accumulator cylinder.
4
8.
Perform only those maintenance instructions
described in this manual. If major repairs are
ever needed or assistance is desired, contact an
Authorized TORO Distributor. To ensure
optimum performance and safety, always
purchase genuine TORO replacement parts and
accessories to keep the TORO all TORO.
NEVER USE "WILL–FIT" REPLACEMENT
PARTS AND ACCESSORIES MADE BY
OTHER MANUFACTURERS. Look for the
TORO logo to ensure genuineness. Using
unapproved replacement parts and accessories
could void the warranty of The TORO Company.
Advertisement
Table of Contents
