Table of Contents
Advertisement
Installation
E.
Locate the blue 3/4" (19 mm) hose that runs
from the injector outlet to the pump inlet.
Cut the hose just behind the engine
(Fig. 13).
F.
Install the tee fitting included with the kit in
the blue 3/4" (19 mm) hose (Fig. 13).
G. Install the blue 3/8" (9.5 mm) hose from the
regulator to the tee fitting (Fig. 13).
2
1
Figure 13
1. Blue 3/4" (19 mm) Hose
(from Injector outlet to
Pump inlet)
21. Reinstall the fuel tank.
12
1
3
2. Blue 3/8" (9.5 mm) Hose
(from Regulator)
3. Tee Fitting
Advertisement
Table of Contents
