Parkside PBSG 95 E6 Translation Of The Original Instructions page 59

jewellery. Keep your hair,
clothing and gloves away
from moving parts. Loose
clothes, jewellery or long hair
can be caught in moving parts.
g) If devices are provided
for the connection of dust
extraction and collection
facilities, ensure these are
connected and properly
used. Use of dust collection
can reduce dust-related hazards.
h) Do not let familiarity
gained from frequent use
of tools allow you to be-
come complacent and ig-
nore tool safety principles.
A careless action can cause
severe injury within a fraction of
a second.
4) Power tool use and care
a) Do not force the power
tool. Use the correct power
tool for your application.
The correct power tool will do
the job better and safer at the
rate for which it was designed.
b) Do not use the power tool
if the switch does not turn
it on and off. Any power tool
that cannot be controlled with
the switch is dangerous and
must be repaired.
c) Disconnect the plug from
the power source and/or
remove the battery pack,
if detachable, from the
power tool before making
any adjustments, chang-
ing accessories, or storing
power tools. Such preventive
safety measures reduce the risk
of starting the power tool acci-
dentally.
d) Store idle power tools out
of the reach of children
and do not allow persons
unfamiliar with the power
tool or these instructions
to operate the power tool.
Power tools are dangerous in
the hands of untrained users.
e) Maintain power tools and
accessories. Check for mis-
alignment or binding of
moving parts, breakage of
parts and any other condi-
tion that may affect the
power tool's operation. If
damaged, have the power
tool repaired before use.
Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp
and clean. Properly main-
tained cutting tools with sharp
cutting edges are less Iikely to
bind and are easier to control.
g) Use the power tool, ac-
cessories and tool bits etc.
GB MT
59