Clean & Storage - Gemini GGS1580 Manual

CLEAN & STORAGE
Cleaning water tank
Parts involved: water tank, water inlet lid
Washing frequency: It is recommended to wash after one month or continuous consump-
tion of about 20L of water. It is related to the water quality used, and the cleaning cycle
can be appropriately extended or shortened according to the actual situation.
Open the water inlet lid counterclockwise
Pic.24
Rinse the water inlet lid with clean water, and at the same time rinse the water tank with
clean water, when finished, replace the water inlet lid, put it back on the bottom of the
water tank, and tighten it clockwise.
Cleaning the host
It is recommended not to keep the remaining water in the water tank after each usage, as
the remaining water will deteriorate, and reuse will contaminate the clothes.
Tools: Flat-blade screwdriver, brush.
First turn off the power, pull out the plug, wait for the main unit to cool down for 30 min-
utes, remove the water tank, pour out the remaining water in the tank from the water
inlet, turn the unit over and use a word Unscrew the water drainage valve with a screw-
driver counterclockwise. Wash the removed water drainage valve with water, remove
the stubborn dirt with an iron wire and to extend into the drain outlet of the main unit
to dredge the drain outlet. Pour a little water into the dirt-hanging port of the main unit,
shake the main unit lightly and pour out the water, repeat 2-3 times. Tighten the water
drainage valve clockwise when finished.
After operation, press "
Water hardness varies among different cities. There could be chances for calcium resi-
dues in the water to remain in the appliance. The calcium may accumulate inside the wall
of steam hose and affect the power of steam. Therefore, it is recommended to follow the
below steps once a month for better maintenance:
1. Disconnect from the power supply.
2. Let the appliance to cool down completely (at least for 30 minutes).
3. Take out the water tank from the appliance, pour away the remaining water in the
tank and wipe the tank until it is dry.
4. Remove the hanger, reduce the length of the rods to the shortest.
5. Turn open the water drainage valve by anti-clockwise direction and let the water re-
mained in the main machine to drain out completely. In order to avoid any Injured, please
wait at least 30 minutes and cool down before turn open the water drainage valve.
" button and unplug the appliance from the power socket.
9
Drain the remaining water in the tank
Pic.25