Gemini GGS1580 Manual page 8

IRONING METHODS
When using it for the first time, please iron it on a waste cloth or a damp cloth for a few
minutes to remove the residue on the steam plate. It is normal for a small amount of
white particles to appear during the first use.
1. Gently press the metal panel of steam brush on the clothes, move the brush up and
down at such a speed that allows the steam to penetrate into the fibers appropriately
to remove wrinkles (Pic.17).
2. After ironing the main part, iron the specific parts from up to down (Pic 18 & 19). When
ironing the collar, you may fold the whole collar back, hold one end of the collar by
hand, move the steam brush horizontally (Pic 20 & 21), be aware of the hot steam.
3. When ironing the sleeves, pull the sleeves straight and move the steam brush along
the sleeves (Pic 22 & 23).
4. After ironing the front of clothes, turn the clothes over and repeat on the back.
Pic.17
Pic.20
Pic.23
NOTE:
• When the steam hose is bent, water droplets may appear in the steam holes, and the
amount of steam will be significantly reduced. In this case, lift the handle for 2-3 sec-
onds to correct the problem.
• When the appliance is not in use, please place the steam brush on the steam brush
holder to prevent the steam from hurting people or damaging the contact surface.
• When the appliance is working, please fully extend the telescopic rod to the highest
position to ensure that the steam hose is unobstructed and the steam can operate
normally. Never fold the hose, otherwise it will affect the operation.
• Do not pull the steam hose with excessive force, otherwise it will damage or cause
steam leakage. Never use the steam hose to move the unit.
Pic.18
Pic.21
8
Pic.19
Pic.22