Installation Before Use - Gemini GGS1580 Manual

INSTALLATION BEFORE USE

• Please read this manual carefully.
• Unpack all parts.
1. Telescopic rod installation
• Take the telescopic rod, first open the telescopic rod fixing
cover, pull the rod 1 up along the axis, and then fasten the
fixing cover (Pic.2). The operation of lever 2 and lever 3 is the
same as above.
• Insert the two telescopic rods into the corresponding sockets
of the base of the main unit respectively (Pic.3).
Note: When disassembling, hold the telescopic rod and lift it up,
and push down the disassembly buttons on both sides of the
main unit at the same time, and the telescopic rod can be pulled
out
Pic.1
2. Fur brush installation
• If required, take out the fur brush, align the plastic clasps at bottom of fur brush with
and grip it into the metallic snap close at the bottom of steam brush. To remove attach-
ment, follow directions in reverse order (Pic.4 & 5).
Pic.4
Pic.2
Pic.5
5
Pic.3
rod 1
rod 2
rod 3