Troubleshooting; Product Specifications - Gemini GGS1580 Manual

Table of Contents

Advertisement

6. Mix 100ml of vinegar with 100ml of cold water, and slowly pour the
mixture into the appliance from the water inlet port on the main unit.
(Do not move the appliance during the cleaning)
7. Turn open the water drainage valve and let the mixed solution to drain
out completely.
8. Then pour clean water from the water inlet port of the appliance, and let the water
drain out for several times until the smell of vinegar disappears.
9. Use clean and wet cloth to clean the water tank and steam brush. Put back the water
drainage valve into appliance and rotate clockwise to lock the water drainage valve
until fixed.
10. store the appliance in a dry and well-ventilated place.
Note: When cleaning, be careful not to lose the water drainage valve and seal ring.

TROUBLESHOOTING

IssUE
The machine does not
work or the indicator light
of switch is not lighted
The indicator light is on
but there is no steam
Less, discontinuous or
no steam
Water don't flow into boiler
Water tank deformation
Overflow of water tank

PRODUCT SPECIFICATIONS

Model no.:
Voltage:
Frequency:
Power:
Water tank volume: 1.5 L
Product dimensions: 300(H) x 450(W) x 320(D) mm (Main unit)
*The final product specification may be varied according to a different lot of material and
actual input voltage power of the usage area.
CAUsE
Power-off or fusion of fuse
The socket is not connected or plugged in
properly
Unfavorable connection of socket
The power switch is not turned on
The water in water tank is not at the correct
The water tank is not installed in position
severe inflection of steam hose
Water don't flow into boiler
The water in water tank does not reach the
designed water level
The water tank is not installed in position
severe inflection of steam hose
Blockage of water intake
The water tank is not installed in position
Used hot water
Cracking of water tank
Breakage of seal ring
GGs1580
220-240V~
50/60Hz
1580W
1580(H) x 450(W) x 320(D) mm (Main unit with rods)
Check and confirm
Connect to the power supply and ensure the
plug is plugged in thoroughly
Check whether the power socket is normal
or not
Turn on the power switch
Fill water promptly
Install the water tank in position
straighten the steam hose
shaking water tank or re-placed the water tank
Fill water promptly
Install the water tank in position
straighten the steam hose
Wash the water intake
Install the water tank in position
Replace a new water tank
Replace a new water tank
Replace relevant fittings
10
sOLUTION

Advertisement

Table of Contents
loading

Table of Contents