Gemini GGS1580 Manual page 6

3. Ironing board installation
• Take out the ironing board, insert the hanger hook into the top of the ironing board
(Pic.6), then install the steam brush hook on one side of the telescopic rod sleeve
behind the ironing board (Pic.7), and insert the assembled ironing board into the
telescopic rod (Pic.8).
Pic.6
4. Adjust ironing board
• When need to adjust the ironing board angle, the ironing board angle can be adjusted
by pivoting downward the connecting rod behind the ironing board (Pic.9 & 10). After
adjusting the ironing the board ,you need to adjust the height of the telescopic rod. You
can open the snap clos on the telescopic rod (Pic.11), and adjust it to the appropriate
height before locking it.
Pic.9
5. Steam brush fixed
• Hold the steam brush handle, put the steam brush into the holder from the bottom
(Pic.12), slowly downward and release the hand until the steam brush is placed
smoothly.
Pic.12
Pic.7
Pic.10
6
Pic.8
Pic.11