Switching The Hand Vacuum On And Off; Checking The Hand Vacuum And The Battery; Working With The Hand Vacuum - Stihl SEA 20.0 Instruction Manual

English
9 Switching the hand vac‐
uum on and off
9.1 Switching on the hand vacuum
► Hold the hand vacuum firmly with one hand on
the control handle – wrap your thumb around
the control handle.
► Press the trigger (1) with your index finger and
keep depressed.
The hand vacuum accelerates, and the
sweepings are sucked in.
9.2 Switching off the hand vacuum
► Release the trigger.
The vacuum shredder stops sucking in the
sweepings.
► If the vacuum shredder continues to suck in
sweepings: Remove the battery and consult a
STIHL specialist dealer.
The hand vacuum is defective.
10 Checking the Hand Vac‐
uum and the Battery
10.1 Checking the controls
Trigger
► Remove the battery.
► Press the trigger.
► If the trigger is stiff or does not spring back to
its idle position: Do not use your hand vacuum
and contact your STIHL servicing dealer for
assistance.
The trigger is defective.
Switching on the hand vacuum
► Insert battery.
► Press and hold the trigger.
The sweepings are sucked in.
► If 3 LEDs flash red: Remove the battery and
consult a STIHL dealer.
There is a fault in the hand vacuum.
► Release the trigger.
The vacuum shredder stops sucking in the
sweepings.
12
1

9 Switching the hand vacuum on and off

► If the vacuum shredder continues to suck in
sweepings: Remove the battery and consult a
STIHL specialist dealer.
The hand vacuum is defective.
10.2 Testing the Battery
► Insert battery.
► Press button on hand vacuum.
The LEDs glow or flash.
► If the LEDs do not glow or flash: Do not use
the hand vacuum and the battery and contact
your STIHL servicing dealer.
Malfunction in hand vacuum or battery.
11 Working with the Hand
Vacuum
11.1 Holding and guiding the hand
vacuum
► Hold and guide the hand vacuum with one
hand on the control handle (1) and wrap you
thumb around the control handle.
11.2 Picking up Dust and Dirt
► Switch on the hand vacuum.
► Hold the hand vacuum with one hand on the
control handle and pick the material up either
directly or via an attached accessory.
For optimum performance, observe the recom‐
mended temperature ranges,
11.3 Activating and Deactivating the
Power Lock
► Switch on the hand vacuum.
1
18.6.
2 1
0458-006-8321-B