Related Manuals for NATHAN JAMES Bonnie 74201
Summary of Contents for NATHAN JAMES Bonnie 74201
- Page 1 Let’s build the Bonnie Media Unit SKU 74201 Scan me! Inspiration Digital Instructions Free Lifetime Warranty 22-0923...
-
Page 2: What's Included
Ok, let’s What’s included get rolling Description Top Panel Bottom Unit This should be easy, just follow our instructions and you will be back to Netflix in no time. Left Side Panel Right Side Panel Estimated time for assembly Left Division Panel 115:00 Right Division Panel Shelf... - Page 3 The goods IMPORTANT 1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes. 2. Do not over tighten screws and bolts to avoid stripping. 3. Please use hand tools to assemble this product. Do not use power tools.
- Page 4 What’s included Description Cam Bolt Cam Lock M6*30mm Wood Dowel M4*12mm Screw M3.5*10mm Screw M4*35mm Screw Door Stop Hinge M6*50mm Bolt Flat Washer Knob M4*25mm Bolt Drawer Runner M4*16mm Bolt M4*30mm Screw Scan me! Allen Key Inspiration Digital Instructions Free Lifetime Warranty Spring Washer...
- Page 5 The goods IMPORTANT 1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes. 2. Do not over tighten screws and bolts to avoid stripping. 3. Please use hand tools to assemble this product. Do not use power tools.
- Page 6 Step 1 Alright, time to get started! But first things first, grab a snack. A hungry furniture assembler is never a good thing. Place the Top Panel (1) on the floor and screw the Cam Bolts (A) into their corresponding holes. Next, attach the Door Stops (G) to the left and right side using the M3.5*10mm Screws (E).
- Page 7 Step 2 Don’t worry, this step is a lot simpler than it looks. Now we’re going to attach the Drawer Runners (M) to the Left Division Panel (5) and Right Division Panel (6) using the M3.5*10mm Screws (E). Pay careful attention to the labels CL and CR, written on each of the Drawer Runners (M).
- Page 8 Step 3 Now it’s time to start putting together some of these panels! Also, did you eat your snack already? We’re not judging, we ate ours in step 2. Insert the 6*30mm Wood Dowels (C) into their corresponding holes in the sides of the Shelf (7). Then, attach the Left Division Panel (5) and Right Division Panel (6) to the Shelf (7) by aligning the Wood Dowels (C) with the corresponding holes in...
- Page 9 Step 4 Get excited, now is when this baby really starts coming together! Place the Top Panel (1) on the ground with the Door Stops (G) facing up. Insert 8 of the 6*30mm Wood Dowels (C) into the corresponding holes in the Top Panel (1). Attach the Right Side Panel (4), the middle section you assembled in Step 3, and the Left Side Panel (3) to the Top Panel (1) by aligning the holes with the Wood Dowels (C) you just inserted and the Cam Bolts (A) you secured in Step 1.
- Page 10 Step 5 This one should be a piece of cake! Slide the Side Back Panels (8) and Middle Back Panel (9) into the slots in the cabinet you assembled in Step 4.
- Page 11 Step 6 You’re almost halfway done! We’re so proud of you. Now it’s time to attach the Bottom Unit (2) to the rest of the cabinet you’ve assembled by first inserting 6*30mm Wood Dowels (C) into the corresponding holes in the side of the cabinet. Once aligned, secure in place using the M4*35m Screws (F).
- Page 12 Step 7 Time to add the legs! Secure the Legs (11) to the Bottom Unit (2) using the 6*50mm Bolts (I). First place the a Flat Washer (J), then a Spring Washer (S), then the 6*50mm Bolt (I). Tighten using the provided Allen Key (R). Repeat this process for all 4 legs, using 2 bolts per leg.
- Page 13 Step 8 Hinge time! Attach the Hinges (H) to the Doors (10) using the M4*12mm Screws (D).
- Page 14 Step 9 You’re so close to the finish line we can taste it! Or maybe that’s the snack we ate earlier…either way, it’s time to attach those doors! Attach the Doors (10) to the Left Side Panel (3) and Right Side Panel (4) by securing the Hinges (H) using the M4*12mm Screws (D).
- Page 15 Is your cabinet door looking crooked or unevenly spaced? Then you’ve come to the right place. Follow the illustrations below to get your cabinet door aligned and ready for action. If your door is too low or too high… Loosen the height screws, then move the door up or down to make it level. If the space between your doors is off…...
- Page 16 Step 10 Now it’s time to assemble the drawer. Attach the Drawer Left Side Panel (13) and Drawer Right Side Panel (14) to the Drawer Back Panel (15) using the M4*30mm Screws (O). Once secure, slide the Drawer Bottom Panel (16) into place. Step 11 Next, screw the Cam Bolts (A) into the corresponding holes in the Drawer Front Panel (12).
- Page 17 Step 12 Remember those Drawer Runners we mentioned in Step 2? Time to put those to use! Attach the Drawer Runners (M) to the sides of the drawer using the M3.5*10mm Screws (E). The Runner labeled DL should be attached to the left side, while the Runner labeled DR should be attached to the right side.
- Page 18 No heartburn, when we handle the return Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com we will issue you a free replacement with zero hassle. Our way Their way Give us a call Re-package item Replacement Schedule pick up Track package Replacement...
-
Page 19: Proper Use
Any modifications will present the risk of creating significant safety Nathan James and its parent companies cannot issues which NJ will not be responsible for. be held legally responsible for any injuries or death resulted from failure to follow instructions or improper use of this product. - Page 20 If you are happy with your product, tell your friends and family about us or even better leave us a review online. Spreading the word gives us the opportunity to make more people happy and keep our prices low for your next purchase. Brooklyn Burdon Founder, Nathan James...