Page 1
N E W C O E N T E R P R I S E S INSTALLATION and OPERATION MANUAL For AKH SERIES BREWERS AKH-D BREWER SPECIFICATIONS Model AKH-1 AKH-2 AKH-3 AKH-AP AKH-D AKH-LD AKH-TC AKH-TT No of Warmers Width Length Height* 8-1/2"...
Page 2
INSTALLATION INSTRUCTIONS WARNING: - Read and follow installation instructions before plugging or wiring in machine to electrical circuit. Warranty will be void if machine is connected to any voltage other than that specified on the name plate. 1) Plug or wire brewer to appropriate voltage circuit as indicated on serial tag. For (AKH Thermal Model)Turn master switch, located on rear of brewer, to the ON position.
Page 3
Prompt disposition will be made if item proves to be defective, within warranty. Before returning any item, write or call Newco, or the dealer from whom the product was purchased, giving model number, serial number, and date of purchase, and describe the nature of the defect. If damage was incurred during transit to you, file claim with the carrier.
Page 4
REMOVAL OF ANY PANEL OR REPLACEMENT OF ANY COMPONENT! NOTE: IN CANADA REPAIRS ARE TO BE DONE BY CERTIFIED ELECTRICIAN OR BREWER MUST BE REINSPECTED TO MAINTAIN APPLICABLE CERTIFICATION Newco Enterprises, Inc. * 1735 South River Rd. * P.O. Box 852 * St. Charles, MO 63303...
Need help?
Do you have a question about the AKH 1 and is the answer not in the manual?
Questions and answers