Getting Started; Installation Instructions - Neuros Digital Audio Computer 128MB User Manual

Getting Started

You are now ready to install the Neuros Synch Manager and begin downloading files to the
Neuros.

Installation Instructions

1. Install application by inserting the Neuros Synchronization Manager CD-ROM and
following onscreen installation instructions. If installation screens do not
automatically appear, view CD contents through Windows Explorer and click the
"Setup" icon. The installation will take a few minutes. The PC will prompt you to
reboot to complete installation (select "Yes"). Installation will start automatically
after reboot, and prompt screens will walk you through to completion.
2. Turn on the Neuros by pressing and holding the Play button for a few seconds. The
Play button is located directly below the Joystick button.
3. Connect your Neuros via the USB cable provided. Your Neuros must be connected to
your PC to set User Preferences and to synchronize.
4. Open your Neuros Sync Manager application. With Neuros connected to your PC, you
will be prompted to complete your User Preferences. Enter in your User Name
5. Complete User Preferences. A default path has been set for the folder location on
your PC to store the HiSi samples and recordings that you make on the Neuros.
Your serial number should automatically be filled in.
6. If not, click "Get ID" (your Neuros must be connected via USB for the application to
read your serial number). Click OK to complete.
If you cannot "get ID" and are a Windows 98 SE user, please see the Win 98 driver
installation instructions here:
7. You will be prompted to register. Registration is required to use the Neuros HiSi song
identification
login at www.neurosaudio.com, where you can participate in user forums and learn
about new features and Products).
8. Check for Firmware and Software Upgrades. After installation, Neuros Synch Manger
will automatically search for a more updated version of the Neuros Device firmware.
This will be sent to the device the first time you Synchronize. To check for updates to
the Neuros Synch Manager application, go to the Help Menu and select Check for
Application Updates.
9. You now can begin loading music file information into the Neuros Sync Manager. See
the next section, "Importing Music to the Neuros Synch Manager."
http://neurosaudio.com/support/win98install.asp
feature. Your registration profile will also be available to you when you
6