Backpack Swapping; Firmware And Software Updates; Troubleshooting - Neuros Digital Audio Computer 128MB User Manual

Backpack Swapping

With Neuros Firmware 2, "on-the-fly" backpack swapping is available. When you use the
128 MB Neuros backpack, music you synchronize is stored on the internal flash chip on the
player. You can now save the flash chip contents (tracks, recordings, playlists, presets, etc.)
when you insert the player into the hard drive backpack. When the player is inserted in the
hard drive backpack, a message will appear, asking if you wish to "Save Flash Contents to
Hard Drive". Clicking Yes will begin saving the flash memory contents onto the hard drive.
When you are ready to use the smaller backpack, before you remove the player from
the Hard Drive backpack, Go to Settings on the main menu and select "Backpack Swap".
Then select "Restore Flash" and "Yes". The contents of the flash chip will be restored and
the Neuros will shut down. When the player is reinserted in the smaller backpack, the flash
contents will be restored and ready to play.

Firmware and Software Updates

Users can easily upgrade their Neuros Synch Manager Application and Neuros device
firmware through the Check for Updates options available in the NSM Help Menu We have
made the update process automatic.
To update firmware or software:
1. You must be connected to the Internet to update your Neuros Sync Manager
application software and your Neuros device firmware.
2. From the Neuros Sync Manager, select Help and then select either Check for NSM
Software Updates or Check for Neuros Firmware Updates.
3. For firmware updates, select the Synchronization button to transfer these upgrades
to your Neuros.
4. Follow the PC prompts for NSM application updates and follow the Neuros display
prompts for firmware updates.
NOTE: If you have a USB 2.0 backpack, you must have Neuros FW 2 installed. Do
not use firmware version 1.45 or lower with your USB 2 backpack.

Troubleshooting

Problem
Neuros is not responding to button clicks.
Screen is frozen or device stopped
working.
MyFi not working.
MyFi does not have good reception.
I am trying to make a voice or line-in
recording, but only a 30- second HiSi
Recording is made.
I just Synchronized the Neuros with
Solution
1. Make sure keypad lock is in the
down position.
2. Shut off Neuros by pressing Up on
the Joystick button and the Play
button at the same time.
3. Wait 15 seconds. Press and hold
Play to restart.
MyFi Off is selected. From the settings
menu, make sure MyFi is set to Auto
Detect.
See the MyFi FAQs at
www.neurosaudio.com/support/MyFifaq.asp
Click the button to stop the HiSi
recording. Double-click the
to make a recording.
See "Orphan Tracks" in the Table of
HiSi button
22