Real-Time My Mix Playlist Modification; Myfi: Broadcast Neuros Through Any Fm Radio - Neuros Digital Audio Computer 128MB User Manual

Since only one My Mix playlist can be created on the device at a time, you may want to
transfer this playlist to NSM and clear this space so a new My Mix playlist can be made on
the Neuros device.
The My Mix playlist can be saved by creating and naming a new playlist in Neuros Sync
Manager and dragging the songs from My Mix into it. Then the My Mix playlist can be
cleared. The new playlist you created in NSM can be transferred back onto Neuros.
To save, name and clear My Mix Playlist
1. When you connect the Neuros device to your PC with the USB cable, the My Mix
playlist is automatically updated in the Neuros Sync Manager Playlists view.
2. Click on the My Mix playlist in NSM and the tracks will be displayed
3. Create a new Playlist with a name of your choice.
4. Click on the My Mix playlist and select the tracks.
5. Drag the tracks in My Mix to the new playlist you just created (put your cursor over
the playlist's name).
6. Clear your My Mix playlist by deleting the tracks (unless you specify, they will not be
deleted from your hard drive).
To create and add tracks to the My Mix playlist
1. Identify the song or recording you would like to add to My Mix from the Songs or
Recordings menus.
2. Right click on the Joystick to pop up the Xi menu.
3. Select "Add to My Mix". A confirmation message will let you know that you have
successfully added that selection to the My Mix playlist.
4. Left click on the Joystick to return to the previous menu to select additional tracks
for the My Mix playlist.

Real-time My Mix Playlist Modification

While listening to music, you can add additional tracks to your My Mix playlist. This will
allow you to listen to the playlist and add or remove upcoming songs. Songs are listed in
the order in which they are added.

MyFi: Broadcast Neuros through any FM radio

Now you can enjoy your music everywhere and anywhere. With the built-in FM transmitter
on the Neuros, you can broadcast your music in the car, the office or the house. No need for
additional accessories or wires!
With the Neuros Auto Scan feature, Neuros will automatically scan the FM dial and return to
you the most available frequency for your broadcast.
Using MyFi
1. Initiate Auto Scan. First plug in
your earphones since they will
act as an antenna for the Neuros
tuner. Then, go to the Settings
menu and Select MyFi.
13