Page 3
A: Loudspeaker top [POWER] button On/Off Switch [BLUETOOTH] button Operating Mode: Bluetooth [MICROPHONE MUTE] button [ACTION] button [VOLUME -] button Volume control [VOLUME +] button Volume control B: Loudspeaker front Status LED Status LED update C: Loudspeaker back [RESET] button Update port [SETUP] button Mains power supply...
Page 4
The Loudspeaker is connected to a network. LED 1 - 3 pulses red, WIFI is disconnected. Initial setup can be carried out via green LED 5 pulses the Hama Smart Audio App. Network LED 1 - 3 quickly flashes indicator WPS mode is active.
00054880/00054889 SIRIUM1000ABT Technical Data Alexa Voice Service Other Details and Specification 20 cm x 9 cm x Voice Control ü Dimensions (W x H x D) 11.5 cm Number of Microphones Weight 900 g Microphone Array Far-Field Streaming Connectivity Wifi Stream (DLNA compatible) ü...
G Operating Instructions Thank you for choosing a Hama product. Take your time 3. Safety Notes and read the following instructions and information • The product is intended only for use inside buildings. completely. Please keep these instructions in a safe place •...
5. Start-up and operation Note – charging process • A complete charging cycle takes about 3–5 hours. Warning • The product's battery can be charged both when it is • Only operate the product from a socket that has been switched on and off.
[SETUP] button (3) for around 7 seconds to open an •Android 4.4.2 or higher AccessPoint (flashes slowly). • Ensure that the Hama Smart Audio App is installed • Open the iTunes AppStore or Google Play Store on your on your smartphone and that all updates have been smartphone.
Page 9
• Open your smartphone's WLAN settings by touching [WLAN settings]. • Connect your smartphone with the loudspeaker. • Now return to the Hama Smart Audio App on your smartphone. • Select the required WLAN name (SSID) with which you wish to connect the loudspeaker.
Page 10
• The loudspeaker now connects to the network. Note After successful connection, "Loudspeaker configured • Often the Pre-Shared Key is printed on the back successfully" appears on the smartphone. of the router / AP. • When entering the key, take notice of capitalisation. •...
Page 11
Amazon account. name, etc.) in the Amazon Alexa App. Further information on this can be found at www.amazon.com -> Help and • Following successful login, you will return to the Hama Customer Service. Smart Audio App.
• Open the Bluetooth settings on your device and wait The loudspeaker allows audio files stored on a PC, tablet until the Hama SIRIUM1000ABT is shown in the list or smartphone to be played. of found Bluetooth devices.
Page 13
You can now talk to Alexa. from the loudspeaker, proceed as follows: • While Alexa is answering, the status LED flashes blue. • Open the Hama Smart Audio App and select the required Note loudspeaker. • If the Amazon Market App has already been installed •...
Page 14
15. Warranty Disclaimer the list and confirm it. The radio then connects Hama GmbH & Co KG assumes no liability and provides no immediately to the network. warranty for damage resulting from improper installation/ mounting, improper use of the product or from failure to 11.
Bluetooth SIG, Inc. and ® any use of such marks by Hama GmbH & Co KG is under license. Other trademarks and trade names are those of their respective owners. All listed brands are trademarks of the corresponding companies. Errors and omissions excepted,...