Allegro MicroSystems ASEK31300 User Manual

Allegro MicroSystems ASEK31300 User Manual

Advertisement

INTRODUCTION
The ASEK31300 demonstration board, as described in this
quick guide, is intended for the purpose of evaluating the
ALS31300 device.
ASEK31300 Quick Guide, Rev. 1
MCO-0001329
ASEK31300 Demonstration Board Quick Guide
Figure 1: ASEK31300 Demonstration Board
ASEK31300 BILL OF MATERIALS
• ASEK31300 demonstration board (TED-0002209)
User Manual
November 7, 2022

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ASEK31300 and is the answer not in the manual?

Questions and answers

Summary of Contents for Allegro MicroSystems ASEK31300

  • Page 1 User Manual ASEK31300 Demonstration Board Quick Guide INTRODUCTION ASEK31300 BILL OF MATERIALS The ASEK31300 demonstration board, as described in this • ASEK31300 demonstration board (TED-0002209) quick guide, is intended for the purpose of evaluating the ALS31300 device. Figure 1: ASEK31300 Demonstration Board ASEK31300 Quick Guide, Rev.
  • Page 2 1. Connect one end of the USB communications cable to a personal computer. 2. Connect the other end of the USB communications cable to the USB port on the ASEK31300 demonstration module. DOWNLOADING SOFTWARE GUI 1. Login to the Allegro software portal at: https://registration.allegromicro.com/login...
  • Page 3 Copyright 2022, Allegro MicroSystems. Allegro MicroSystems reserves the right to make, from time to time, such departures from the detail specifications as may be required to permit improvements in the performance, reliability, or manufacturability of its products. Before placing an order, the user is cautioned to verify that the information being relied upon is current.

Table of Contents