Advertisement
■ Using the Printer via a LAN
Cable
Important
• A Ethernet cable does not come with
this printer. Use a commercially available
Ethernet cable that is compatible with your
computer.
• Use a Category 5e or better twisted pair
Ethernet cable.
• Connection to a corporate LAN must be
made by a network administrator.
• If several printers will be connected to the
same network, configure the printers one
at a time. If several printers are turned
on and configured at once, the default
IP address assigned to each printer will
overlap and will prevent the use of the
network.
1
Check that the printer is powered on.
If the printer is turned off, press the power
key to turn the printer on.
2
Go through steps 3 to 9 of the procedure
for using the printer via a USB cable.
P.4)
3
Select [Connect via network] and then
click [Next].
4
Click [Next].
5
Confirm the instruction regarding the
security software which is shown on the
screen, and then click [Next].
( →
Note
• If [Windows Firewall settings] dialog box
appears, click [Yes].
Installing Software
8
Advertisement
