Power Connection And Start-Up; Machine Settings - BorMann Pro BSS5500 User Manual

EN
allowed to operate the tools, for this is very dangerous.
e) Be careful in saving the tools. Check whether working parts are in good conditions without chocking or restraining, or
whether there are fractures or damages which may affect the working conditions of the tools. Damaged parts shall be fixed.
Many accidents come from electric tools not taken good care of.
f) Keep cutting tools sharp and neat. Be careful in taking care of cutting tools with cutting edges so that they may not be easily
restrained or orientated.
g) Attachments for the use of electric tools shall be applicable for the manual. And there are rules for the models of specified
tools. Be well considered of the operation conditions and jobs to be executed. Inapplicable use of electric tools may lead to
dangers.
Service
a) Let qualified repairman for the fixing of your tools and use original fittings only, which can ensure the safety of the tools.
Safety Specifications of Special Tools
Dusts (such as: wood meal, metal powder and paint powder) of danger will occur in operation. Harms will be produced
to those in touch with, especially inhaling these substances, for example, the operator and people working around.
The mill shall be fixed with an applicable dust removal system and put on your dust protection mask, so as to ensure
your fitness.
Goggles should be worn when polishing to prevent potential danger.
Relevant treatment requirements shall be followed for the treatment of flammable or self-ignitable dust that may be
produced in grinding process
Liquid shall be prevented from entering the machine, because mechanical faults may be increased due to that liquid.
Description of Noise and Vibration
The following typical values are reached as per EN60745:
Noise: 82/93dB
Measured variable: K=3dB
Specific radiation values of the machine are measured and compared as per test conditions EN 60745 and also used for
preliminary assessment of vibration and noise produced in operation. Those specific radiation values involve main application
of electric tools. If the electric tools are used for another process, or with another tools together or without proper
maintenance before operation, then the noise and vibration will increase when the tools in service. To make the estimated
value more precise in special period, please take the idle and block-up time into account, which may significantly decrease
operation load of the machine.

Power Connection and Start-up

Power voltage shall be in line with the rated voltage on nameplate. Press down and push forwards the slide switch (1.2) to
locking position to start the machine. Re-press the button, loosen the locking position and place in OFF to shut down the
grinding machine.
Electronic Control
The machine is equipped with full-waveform electronic control unit with following functions:
Smooth start-up
Electronic control smooth start-up can ensure the grinding machine to start without any shaking.
Speed regulation
Step-less speed change of 3000-6000 r/m can be reached through adjustment of wheel (1.4), which is helpful for operator to
set up polishing speed.

Machine Settings

Please unplug and turn off the power before you make any adjustments or repairs on the grinding machine.
Grinding Movement
You can adjust (1.1) and set two grinding modes.
With fixation of the grinding pad, eccentricity movement can be changed to rotational movement. For security, the switch
shall be under off state.
4
WWW.BORMANNTOOLS.COM
Please use ear protectors!