General Safety Specifications - BorMann Pro BSS5500 User Manual

EN
Application
The machine is used for the shining and polishing of materials like woods, plastics, metal, composite materials, coating, filling
material and other similar materials.
The machine is not applicable for processing of materials containing asbestos.
Out of the consideration for electric safety, the machine is not applicable for the storage and usage under moisture
conditions, which is only used for dry grinding.
We will not take any responsibilities for machine damages and personnel injuries caused by violation operations.
Before taking the machine into use, please read over all the safety manual and operation manual carefully and
systematically.
Be sure all the supplied technical data and operation manuals are well saved.

General Safety Specifications

a) Keep your working section neat and orderly. Dirty and dark working places will enhance risk rate.
b) Combustible liquids are forbidden, for liquids may trigger the operation tools into working at explosive and dangerous
areas. Electric tools will bring sparks which may light the dust or stream.
c) When operating the electric tools, keep children and other irrelevant personnel away. Lack of attention may make you
unable to control the tools.
Electrical Safety
a) Plugs must be matched with the sockets and shall not be restructured. No travel adaptors with grounding equipment are
allowed. Original plugs and applicable sockets can reduce shock danger.
b) People should be physically away from the grounding surfaces, such as pipelines, heating devices, furnace and refrigerator.
If not, it will increase shock danger.
c) Keep your tools away from rain or moist. Electric tools encountering water will bring more shock danger.
d) Unassigned applications, such as dragging and pulling tools, hanging tools or taking plugs down the sockets, by use of
cables, are not allowed. Cables shall be away from heat, oil, sharp edges or moving parts. Damaged or twining cables may
increase shock danger.
e) Be sure to use the extending cables applicable for outdoor use when you work outdoors with electric tools, for these cables
can reduce the danger from shock.
Personnel Safety
a) Be careful and attentive when doing the operation, and be sensible when using electric tools for operations. Tools are not
allowed for using when you are tired, using drugs or taking alcohol. Momentary lack of attention may bring about dangerous
damages.
b) Wear your personnel protection devices and always take the protective glasses. Put on personnel protective devices, such
as dust mask, antiskid shoe, safety cap or sound insulation earmuff according to different conditions for electric tool using,
which may reduce the danger for injuries.
c) Avoid accidental activation. Before plugging into the socket, be aware the switch is on AUS state. When your finger is on the
dragging tool of the switch or plugging into the cable with the switch on, there may be accident.
d) Before you open the equipment power, do not touch the adjusting tools or lock the key. Damage or injury may occur when
rotating the tools or keys in the equipment components.
e) Do not overestimate yourself. Find a safe place and keep balance every single minute to ensure a good control when
emergency occurs.
f) Put on suitable clothes. Do not take loose clothes or ornamentals. Make sure your hair, clothes and gloves away from the
working parts, for they may be rolled into the machine.
g) If the machine is equipped with dust exhaust apparatus, confirm these are well connected and properly used. Application
of these facilities may decrease the danger from dust.
Be careful in use of electric tools
a) Do not overuse these tools. Be sure to take the right electric tools specified for your job. The use of applicable electric tools
can make you in safe working conditions under specified power range.
b) Electric tools with damaged switches shall not be taken into use. Electric tools with damaged switches are dangerous and
must be repaired.
c) Unplug from the socket before setting the tools, replacing attachments or putting aside the tools, which releases
emergency startup of the tools.
d) Keep tools away from the touch of children. People unfamiliar with the tools or having never read the manuals are not
3
WWW.BORMANNTOOLS.COM