Toshiba TLP510U Service Manual page 5

3-1-3. Drive PC Board and F-REM PC Board
1. Remove 1 screw (1) and remove reinforcement metal
plate.
2. Remove 6 screws (2) securing drive PC board.
3. Remove 3 flexible cables (3) from LCD panel and 2
flexible cables (4) from the rear side.
4. Disconnect 8 connectors (5) from drive PC board.
5. Confirm all the connector are disconnected and then
lift up the drive PC board.
6. Remove 1 screw (6).
7. Remove 1 connector (7) and remove F-REM PC Board.
Screws (2)
Connectors (5)
Screws (2)
Drive PC board
Connectors (5)
Flexible cables (3)
F-REM
PC board
Connector
Screw (6)
(7)
Fig. 3-1-3
3-1-4. Digital PC Board
1. Remove drive PC board. (Refer to Fig. 3-1-3.)
2. Remove 1 connector (1).
3. Lift up digital PC board.
Screw (1)
3-1-5. Lamp House Assembly and Exhaust Fan
Reinforcement
metal plate
Note:
Flexible cables (4)
Screws (2)
1. Remove 2 connectors (1).
2. Remove 2 screws (2) and disconnect socket.
3. Remove 3 screws (3) and remove lamp house assembly.
4. Remove 2 screws (4) and remove exhaust fan.
Screws (2)
5. Remove 1 screw (5) and remove exhaust fan mounting
Connectors
(5)
< When removing the exhaust fan >
Make sure the top cover is removed. Remove 2 screws (4)
and disconnect connector of fan lead, and the fan will be
removed.
1-3
Fig. 3-1-4
• Remove the lamp unit in advance. (Refer to Owner's
Manual.)
frame.
Screws (4)
Exhaust fan
Screws (3)
Connectors
Fan mounting
(1)
frame
Screw (5)
Lamp house
assembly
Fig. 3-1-5
Digital PC board
Connector (1)
Screws (2)
Socket
Screws
(3)
Connectors
(1)
Screws (3)