Toshiba TLP510U Service Manual page 13

Lower FL cover
FL lamp unit
FL lamp cover
Screws (1)
FL lamp
Fig. 3-3-4
3-3-4. Arm Assembly
1. Remove document camera. (Refer to Fig. 3-1-1.)
2. Remove 2 connectors (1).
3. Remove 2 screws (2) securing inverter PC board.
4. Remove 6 screws (3) securing base cover and 3 screws
(4) securing arm assembly, remove base plate, and arm
assembly.
Connectors (1)
Screws
(3)
Screws
(2)
Fig. 3-3-5
Screws (2)
Arm
assembly
Base cover
Arm
assembly
Base plate
Screws (4)
3-3-5. Switch PC Board and Inverter PC Board
1. Remove document camera. (Refer to Fig. 3-1-1.)
2. Remove arm assembly. (Refer to Fig. 3-3-5.)
3. Remove 1 screw (1) and pull out inverter PC board
from base cover. Remove 1 connector (2) and remove
inverter PC board.
4. Remove 3 screws (3) and remove switch PC board.
Switch
PC board
Screws
(3)
Screw
(1)
3-3-6. Arm Position Detection Switch
1. Remove document camera. (Refer to Fig. 3-1-1.)
2. Remove arm assembly. (Refer to Fig. 3-3-5.)
3. Remove 3 screws (1) and remove arm cover.
4. Remove 2 screws (2) and 2 screws (3), and remove
metal bracket (4).
5. Remove 2 screws (5) and remove arm release lever
assembly.
6. Remove 1 screw (6) and remove arm position detec-
tion switch.
Screws (2)
Screws (2)
Metal bracket (4)
1-11
Base cover
Connector
(2)
Invertor PC board
Fig. 3-3-6
Screws (5)
Arm release
lever assembly
Arm position
detection switch
Screw (6)
Screws
(1)
Screws
(1)
Screws
(3)
Arm cover
Fig. 3-3-7