XAV-AX100/AX100C2
•
This set can be disassembled in the order shown below.
3-1.
DISASSEMBLY FLOW
SET
3-2. MINI FUSE (F1), TOP COVER
(Page 20)
3-3. USB CABLE (USB1)
(Page 21)
3-4. FRONT PANEL BLOCK, MAIN CHASSIS BLOCK
(Page 21)
3-5. MAIN BOARD
(Page 22)
Note: Follow the disassembly procedure in the numerical order given.
3-2.
MINI FUSE (F1), TOP COVER
20
SECTION 3
DISASSEMBLY
3-6. PANEL BRACKET
(Page 23)
3-8. TFT BOARD
(Page 24)
3-9. BT ANTENNA (BT1), TFT (6.5) (LCD1), TOUCH PANEL (TPN1)
(Page 25)
3 two bosses
2 screw
(PTT2.6
5)
4 three claws
1 mini fuse
(F1)
Note: Due to the structure of the device, you cannot stably
place it on flat surfaces.
Stabilize the device by placing a stand, etc. under it
that is suitable for your work.
3-7. KNOB ASSY
(Page 23)
5 top cover
3 two bosses
stand, etc.
Note: When installing the top cover,
check that four bosses are all
locked.
OK
These are locked tightly.
NG
These are not locked.
SYS SET