Sony XAV-AX100 Service Manual page 9

TOUCH PANEL ADJUST
When the touch panel is replaced, perform the calibration of touch
panel according to the procedure below.
Procedure:
1. Turn the power on this unit.
2. Press the [HOME] button on the main unit.
3. In the state of source off (Home screen is displayed), swipe left
the touch panel, and touch the [Settings] on the touch panel.
[HOME] button Swipe left
Swipe area
4. The "General Settings" screen is displayed.
Move down the scrollbar on the touch panel to display the
"Touch Panel Adjust", and touch it.
Scrollbar
5. The following left screen is displayed, and continue to touch
the center of " " that is displayed on the touch panel until
"Complete" is displayed on the touch panel.
Touch the center of " "
Please touch for adjust.
Cancel
6. Touch the [Complete] on the touch panel to end the calibration.
Touch the [Complete]
NOTE FOR SECURITY FUNCTION
This unit does not use security function by password lock.
NOTE OF REPLACING THE ELECTRICAL PARTS ON
EACH BOARDS FOR REPAIRING
Among mounted electrical parts on each boards, only parts that
are described in the electrical parts list can be replaced for repair.
The parts that are not described in the electrical parts list cannot be
replaced with single for repairing.
Touch the [Settings]
Touch the [Touch Panel Adjust]
Complete
Complete
XAV-AX100/AX100C2
9
SYS SET