InSTALLATIOn
A
notches
A
Before wall installation:
– Unhook the protruding notches on the back side of
the control.
– separate the base from the control
– use the base of the control to trace the fixing point
on the wall
A
Base of the control
B
Holes for the wall mounting
C
Screws
D
Hole for the passage of the electrical connections
D
B
For the remote control wall mounting:
– drill holes in the wall
– pull the electric wires through the hole provided
– fix the base of the control to the wall using suitable
screw and plugs
– connect the electrics
– close the control
Pay attention not to crush the conductors when you
close the control.
24
A
A
B
C