Hydraulic cylinders for inboard engines (25 pages)
Summary of Contents for Uflex PADDLE TRIM
Page 1
Installation Manual PADDLE TRIM PARTNER (drw. n°31733 30/10/2015)
Page 2
Dear Customer, Thank you for choosing an product. has been a reference in steering systems in the field of recreational and professional boating for years. production has always been synonymous with great reliability and safety. All the products are designed to guarantee the best performance in relation to the purpose for which they were designed.
It is recommended to train personnel for the installation of the product and ensure that the provisions are both understood and implemented. page PADDLE TRIM...
USA, Inc’s warranty. If any provision of this limited warranty, or the application of it, is determined to be invalid of unenforceable for any reason, the remainder of this limited warranty and the application of it shall not be affected. page PADDLE TRIM...
Our warranty does not cover labor, towing or other expenses. Further, it does not cover products that have been improperly installed, damaged in installation, misapplied, or misused. Our products are not intended for use in racing applications. - page PADDLE TRIM...
The Paddle Trim has been ergonomically designed to allow the driver to adjust the following functions, without taking his hands off the steering wheel: • engine trim •...
Installation Manual 1.2 Configurations The Paddle Trim can be adapted to FRONT MOUNTING hydraulic steering systems (UP20F, UP25F, UP28F, UP33F, UP39F, UP45F) or steering systems with TILT (mechanical or hydraulic). Both versions can be configured with single or dual control.
• MOUNTING BRACKET FOR HYDRAULIC FRONT MOUNTING STEERING SYSTEM OR STEERING SYSTEM WITH TILT CAUTION The packing must be disposed of according to applicable directives. CONTENTS OF THE SINGLE CONTROL DEVICE PACKAGE qty.1 control device qty.2 M4 screws + qty.2 nuts labels page PADDLE TRIM...
Page 11
CONTENTS OF THE MOUNTING BRACKET FOR HYDRAULIC FRONT MOUNTING STEERING SYSTEMS (compatible with hydraulic front mounting steering systems UP20F, UP25F, UP28F, UP33F, UP39F, UP45F) qty.2 mounting half-brackets for hydraulic front mounting steering systems qty.2 M4 screws - page PADDLE TRIM...
2.1 Tools required for the installation 3 mm male 7 mm hexagonal key spanner 2.2 Installing the Paddle Trim The control device can be attached on both types of half-bracket in three different positions, at the most comfortable angle according to taste. page PADDLE TRIM...
For applications with dual command, repeat the procedure on the second device. Before attaching the bracket to the tilt the surface that will be in contact with the bracket should be thoroughly degreased. The half-brackets must be positioned so that they rest on the tilt (5). - page PADDLE TRIM...
Page 14
Attach the bracket to the steering system by means of the M4 screws (6) with a torque of 3 Nm (2.21 lbft). Once the bracket has been attached, position the half-covers (7) on their respective half-brackets (8). page PADDLE TRIM...
Page 15
Once the bracket has been attached to the tilt, block the electrical cable in the cable clips (9) on the lower part of the bracket. CAUTION The installer must consider sufficient cable length to allow tilting of the mechanism avoiding that this movement can compromise the electrical connection to the device. - page PADDLE TRIM...
Before attaching the bracket to the steering system the surface that will be in contact with the bracket should be thoroughly degreased. The mounting bracket can be installed in any position as long as it is on the cylindrical surface of the steering system (14). page PADDLE TRIM...
Page 17
Attach the bracket to the steering system by means of the M4 screws (15) with a torque of 3 Nm (2.21 lbft). Once the bracket has been attached to the steering system, block the electrical cable in the cable clips (16) on the lower part of the bracket. - page PADDLE TRIM...
Installation Manual 2.3 Electrical connection Connect the electrical conductors of the Paddle Trim as follows: DANGER The system will work only with 12VDC/24VDC power. DO NOT INSTALL ON SYSTEMS WITH DIFFERENT VOLTAGES FROM THESE! CAUTION Power limits: the device can be used with a resistive load of up to 5A and/or a maximum inductive load of 2A.
• Do not allow non-specialised personnel to perform the installation. DANGER The system will work only with 12VDC/24VDC power. DO NOT INSTALL ON SYSTEMS WITH DIFFERENT VOLTAGES FROM THESE! CAUTION Any other applications apart from those shown in this manual ARE NOT ALLOWED. - page PADDLE TRIM...
Wipe the system using non-aggressive and non-abrasive soap and water. 5 - DISPOSAL 5.1 Disposal If, for any reason, you intend to put the control device out of service dispose of the components in accordance with the regulations in force. page PADDLE TRIM...