Specifications - Quest Engineering M120 Owner's Manual

Public address amplifier
Table of Contents

Advertisement

Performance
Input Sensitivity for full output at maximum gain
Balanced Microphone inputs
Unbalanced & AUX inputs
Telephone Paging
Frequency Response
at 1watt from speaker out tap, 80Hz ~18kHz
Tone Controls
100Hz,10kHz
Signal to Noise Ratio at rated power output
Crosstalk at all control maximum
Rated Output Power at THD 0.5%
Total Harmonic Distortion (THD) at 1kHz rated power
Power Band Width at 1kHz from speaker out tap
DC Output Offset
Operating Temperature/Humidity at non-condensing
Output Voltage and Impedance
25V
70V
Construction
Cooling
Dimensions (Width/Height/Depth)
Net Weight
"The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG Inc. and any use of such marks
by Quest Commercial is under license. Other trademarks and trade names are those of their respective owners."
M120
-50dB ± 3dB
-30dB ± 3dB
-21dB ± 3dB
+1.5/-3dB
±12dB ±3dB
Less than 90dB
-70dB at 1kHz
120 Watts
Less than 0.5%
80Hz~18kHz with less than 0.5% THD
Less than ±3mV
0°~40°C at 95% humidity
22V
31V
5.3Ω
41Ω
Convection Cooled
10.63'' x 3'' x 9.06'' (270 X 76 X 230 mm)
12.13 lbs. (5.5 kg)
* Necessary changes are made without notice.

Specifications

16

Advertisement

Table of Contents
loading

Table of Contents