Specifications - Quest Engineering Q1K Owner's Manual

Specifications

Max. Output Voltage
Output Circuitry
Signal To Noise-Ratio
(20Hz - 20kHz, 4Ω load MOL)
THD+N (1W 1kHz)
Dynamic Range
Frequency Response (4Ω, 120W output)
Gain
Protection Circuits
Indicators
ErP (1275/2008/EC) compliant standby
consumption < 0.5W
Mains Input Voltage
Net Weight
Shipping Weight
Dimensions (HxWxD)
Shipping Dim. (HxWxD)
Stereo
All channels driven @ 1kHz, THD < 1%, 230VAC
8Ω
4Ω
Mono Bridge
Single channel driven @ 1kHz, THD < 1%, 230VAC
8Ω
4Ω
70V
* Quest Engineering reserves the right to make changes in specifications, or products without prior notice.
** The figures shown above are 'real world', usable specifications and are conservative as a result. Quest Engineering does not believe
9
70 Vp SE, 140 Vp BTL
Class D
> 91 dB (unweighted)
< 0,01 %
120 dBA
35Hz - 20kHz (fixed 35Hz 4th Order Butterworth High Pass Filter)
28dB
Temperature, Over Current, DC Output, Mains RMS Input, High Frequency, and
Internal Rail Over-voltage
Signal, Clip, Fault, Gain Settings, Meters Mode, ('Q' Illumination)
< 0.5W
85VAC - 265VAC
3.1kg
4.3kg
87 x 110 x 330mm
136 x 254 x 395mm
245 W
490 W
900 W
1050 W
1050 W
in portraying misleading or exaggerated specifications.