Removing Storage Central Software From A Pc; Automatic Installation Screen When Rebooting A Pc; Basic Functioning; Checking Power - NETGEAR SC101 User Manual

Storage Central Turbo Model SC101T and Storage Central Model SC101 User Manual

Removing Storage Central Software from a PC

To remove the Storage Central Manager utility from a PC you can uninstall it or remove it.
• To uninstall Storage Central software:
From Windows use Start > Program > NETGEAR Storage Central Manager > Uninstall
NETGEAR Storage Central Manager Utility.
• To remove Storage Central software:
Go to the Windows Control Panel > Add/ Remove program, and select NETGEAR Storage
Central. Then remove it.

Automatic Installation Screen When Rebooting a PC

When you reboot a PC, the Storage Central installation screen can automatically start. This
happens if you:
• Used the "check for updates" feature (see
and
• Removed the current Storage Central Manager installation and rebooted the PC.
You can allow the Storage Central to complete the installation, or you can remove the Storage
Central Manager utility.

Basic Functioning

If you have trouble setting up your Storage Central, check the tips below.

Checking Power

• Make sure the power cord is connected to the storage area network.
• Make sure the power adapter is connected to a functioning power outlet. If it is in a power
strip, make sure the power strip is turned on. If it is plugged directly into the wall, verify that it
is not a switched outlet.
• Make sure you are using the correct NETGEAR power adapter supplied with your storage area
network.
"Receiving Product Updates" on page
v1.0, December 2006
5-3).
5-5