Sc101 Front Panel And Leds; Sc101 Rear Panel - NETGEAR SC101 User Manual

Storage Central Turbo Model SC101T and Storage Central Model SC101 User Manual

SC101 Front Panel and LEDs

The Storage Central SC101 front panel and LEDs are shown and described in the following table.
Use a coin or screwdriver to open the spring loaded front cover lock by turning it clockwise.
SC101 Front Panel
front
cover
lock
Figure 1-3

SC101 Rear Panel

The Storage Central SC101 rear panel is shown and described in the following table.
SC101 Rear Panel
Reset
Power
button
connector
Ethernet
port with LEDs
Figure 1-4
1-4
LED
Hard Disk (red)
Power (green)
Ethernet (green)
Item Description
Power connector Connects to the SC101T power adapter
Ethernet port with Use this port to connect to an Ethernet LAN.
LEDs The port has a green LED and a yellow LED to indicate
Ethernet LAN Link Activity.
• Green off: No power or no Ethernet link detected.
• Green on: Ethernet link detected.
• Yellow off: No power or no Ethernet link detected.
• Yellow blink: Data traffic on the Ethernet LAN
Reset button You can use the rest button to reboot the Storage
Central, or to reset it to factory default settings.
• Reboot: Push and release to reboot.
• Reset: Push and hold for eight or more seconds to
v1.0, December 2006
Description
• Off: No activity or turned off.
• On: Disk activity.
• Off: No power.
• On: Power is on and it has completed its
power on self test diagnostic.
• For Power LED error codes, see
Error Codes" in Chapter 5
• Off: No power or no activity
• On: Powered on but no data traffic
• Blink: Data traffic
reset the Storage Central to factory defaults. This
restores the password for administrator to "password",
and detaches all drives.
"Power LED