Storage Central Turbo Model SC101T and Storage Central Model SC101 User Manual
Rebooting or Resetting the Storage Central
To reboot or reset the Storage Central, use the reset button on the rear panel.
•
To reboot, press and release the reset button.
•
To reset to factory default settings, press reset and hold it for more than 8 seconds. The
administrator password is reset to "password", and all the attached non-shared/private
partitions will be made available to attach again. See
Appendix
A.
•
Only one PC is able to attach to a non-shared drive; if that PC is removed, reset is the only way
for another PC to gain access to that drive.
Note: Reset will NOT reset any drives or the data on the drives.
Windows Removable Disk Message
After you have installed the Storage Central, Windows will detect it as a removable disk when you
reboot your computer. A message like the one below will appear:
Figure 5-1
To prevent this pop-up message from appearing, highlight Take no action, and select the check box
for Always do the selected action, and then click OK.
5-2
"Factory Default Settings" in
v1.0, December 2006