Hardware Description; Wg602 V2 Wireless Access Point Front Panel - NETGEAR WG602 - 54 Mbps Wireless Access Point Reference Manual

Hardware Description

The 54 Mbps Wireless Access Point WG602 v2 front and rear hardware functions are described
below.

WG602 v2 Wireless Access Point Front Panel

The WG602 v2 Access Point provides three status LEDs.
Power
Figure 2-1: WG602 v2 front panel
The following table explains the LED indicators:
LED DESCRIPTION
Power Power Indicator
No power. If this LED does not come on with the power adapter and cord correctly
Off
installed, see
Power is on.
On
Ethernet Ethernet LAN Link Activity Indicator
Off Indicates no Ethernet link detected.
Green On 100 Mbps Fast Ethernet link detected, no activity.
Green Blink Indicates data traffic on the 100Mbps Ethernet LAN.
Amber 0n 10 Mbps Ethernet link detected, no activity.
Amber Blink Indicates data traffic on the 10Mbps Ethernet LAN.
Wireless Wireless LAN Link Activity Indicator
Off Indicates no wireless link detected.
Green On Wireless link enabled, no activity.
Green Blink Wireless link activity.
Introduction
Reference Manual for the WG602 v2 54 Mbps Wireless Access Point
Ethernet Wireless
Chapter 6, "Troubleshooting."
M-10181-03
2-5