Fault Codes - paco LBC1205 Instruction Manual

15. FAULT CODES

There are error codes that may be displayed. These will be displayed in the
following way:
Power on
Error Code
lamp
Polarity Reverse
/ Output Short
Non Battery
Link
Faulty
Battery
Over Voltage
Over
Temperature
Stage
Fault
Cause
lamp
lamp
Short circuit
or reverse
connection of
the clips.
Non battery link.
Bulk charging
has timed out
and stopped after
(Step 2
10 ours.
lamp)
The 12V lithium
battery voltage
is above 15.5V.
Internal
temperature
is above
65 C +/-5 C.
16
Check clips are not
touching each other
OR Check the clips are
correctly connected to
the battery.
Please choose the
right battery type for
connection.
Battery is faulty and
may need to be
replaced.
Disconnect the
charger and check
the battery voltage.
This charger is
suitable for 12V
Batteries only.
Turn off charger and
allow to cool.
O O
Remedy