Life Fitness ELEVATION DISCOVER SI Assembly Manual page 8

Lower Frame: How To's
REPLACEMENT OF UPRIGHT COVERS
1. Remove the top motor shroud cover.
2. Remove and save the two Phillips screws that secure the upright cover to the upright.
3. Loosen the screw securing the upright cover to the main frame (in front of the upright).
4. Remove the upright cover.
Screw (2) Right Upright Cover
5. Install the new upright cover, using the screws removed in Step 2.
Example of a Bad Gap
M ismatch
op Motor
T
C over
Example of a good gap
All Screws:
Torque to
25-35 in*lb.
[29-40 kg*cm]
Upright
Bottom
Side
Shroud
7
Example of a Good Gap