Life Fitness ELEVATION DISCOVER SI Assembly Manual page 10

Upper Frame: How To's
REPLACEMENT OF HANDRAILS
1. Turn the treadmill power switch off.
2. Unplug the line cord from the wall outlet.
3. Remove the cup holders.
4. Remove the inside handrail covers (See
5. Remove the Activity Zone assembly (See
6. Remove the lower bridge cover (See
7. Remove the outer handrail covers (See
8. Remove and save the two bolts that secure the handrail to the Ergo
bar.
9. Remove and save the two Allen bolts that secure the handrail to the
upright.
10. Remove the handrail.
11. Install the new handrail using the bolts removed and saved in Steps
8 & 9.
REPLACEMENT OF ERGO BAR
1. Turn the treadmill power switch off.
2. Unplug the line cord from the wall outlet.
3. Remove the cup holders.
4. Remove the inside handrail covers (See
5. Remove the Activity Zone assembly (See
6. Remove the lower bridge cover (See
7. Remove the outer handrail covers (See
8. Remove and save the two bolts that secure the handrail to the Ergo
bar.
9. Remove and save the three bolts that secure the Ergo bar to the
bridge frame.
10. Disconnect the heart rate cable from the Ergo bar to the console.
11. Install the new Ergo bar assembly using the hardware removed and
saved in Steps 8 and 9.
UF 3).
CA 22).
UF 4).
UF 5).
UF 3).
CA 22).
UF 4).
UF 5).
9
Ergo bar
Allen Bolt (2)
Torque to
62 ft-lb
[84 N-m]
Washers (3)
Washers
(2 on each side)
Screw (2)
Torque to
2.5 ft-lb
[3.4 N-m]
Handrail
Screw to
Bridge Frame
(3)
Screw to Handrails
(2 on each side)
Torque to
2.91 ft-lb
[3.97 N-m]