Replacement Power Adapter - NETGEAR DS104 Install Manual

Replacement Power Adapter

If, for any reason, the power adapter for any of the hubs fails, please contact
NETGEAR immediately to order a replacement adapter. Use the following table
to when ordering a specific power adapter.
Order code
PWR-002-004
PWR-002-005
PWR-002-006
PWR-002-008
PWR-002-010
Order code
PWR-023-002
PWR-023-002
PWR-023-002
PWR-023-002
PWR-023-002
Note: Keep the power cord for the DS116 power supply.
A new cord is not provided.
If you are replacing a power supply, please confirm the voltage required by
looking on the back of the hub. If you own an early version of the DS104,
DS106, or DS108 that is 5 V, please order the DS116 power supply.
Model DS104/DS106/DS108/DS116 Dual Speed Hub Installation Guide
DS104, DS106, DS108
Power adapter (12 V DC, 1.2 A), North America
Power adapter (12 V DC, 1.2 A), Japan
Power adapter (12 V DC, 1.2 A), Europe
Power adapter (12 V DC, 1.2 A), United Kingdom
Power adapter (12 V DC, 1.2 A), Australia
DS116
Power adapter kit (5 V DC, 5 A), North America
Power adapter kit (5 V DC, 5 A), Japan
Power adapter kit (5 V DC, 5 A), Europe
Power adapter kit (5 V DC, 5 A), United Kingdom
Power adapter kit (5 V DC, 5 A), Australia