Controller Initial Setting - Omron CK3M-CPU1 1 Series Startup Manual

3 Serial Encoder Connection Procedures
6
From the File menu, select New ‒
Project.
7
Input a project name and save destina-
tion, and select the OK button.
3-2-2

Controller Initial Setting

Follow the procedure below to perform the initial settings for the Controller.
Precautions for Correct Use
Since all memory is cleared by the initial settings, be sure to save any data remaining in the
Controller that you may need.
1
Type the $$$*** command from the Ter-
minal, and set the Controller to the fac-
tory default state.
3-4
Startup Guide for Serial Encoder BiSS-C/EnDAT 2.1/2.2/1S Motor (O051)