Recalibrating - Jetson Mojo JMOJO-BLK Manual

Recalibrating

1.6
SOMETIMES THE INTERNAL BALANCE MECHANISM OF YOUR HOVERBOARD NEEDS TO BE RESET.
THIS PROCESS IS CALLED "RECALIBRATING."
HOW TO RECALIBRATE:
1. TURN THE MOJO ON AND PLACE IT ON A FLAT SURFACE. ROTATE THE FOOT PADS UNTIL THEY ARE EVENLY
ALIGNED AND PARALLEL TO THE GROUND.
2. PRESS THE POWER BUTTON FOR 5 SECONDS. RELEASE THE BUTTON AFTER YOU HEAR A SHORT MUSICAL TUNE AND
THE ANNOUNCEMENT: "RECALIBRATION COMPLETE."
3. LET GO OF THE POWER BUTTON AND THEN PRESS IT FOR 3 SECONDS TO TURN MOJO OFF.
4. TURN MOJO BACK ON; RECALIBRATION IS NOW COMPLETE.
* KEEP THE HOVERBOARD LEVELED AND STILL THROUGHOUT THE RECALIBRATION PR0CESS.
* DO NOT LEAN OR APPLY ANY WEIGHT ON THE HOVERBOARD WHILE RECALIBRATING.
NOTE: YOU MAY HAVE TO REPEAT THE PROCESS UP TO THREE TIMES TO FULLY RECALIBRATE YOUR HOVERBOARD.
HOLD POWER BUTTON
FOR 5 SECONDS
13