6.4
Shutting Down Printer
This chapter describes EFI Pro 30f Wide Format Printer sleep and shutdown procedures for the overnight, short term (1 -
3 days), and long term (4+ days).
6.4.1
Overnight Sleep Mode
EFI recommends that sleep mode be used for overnight shutdown. Set the printer into sleep mode as follows:
1.
Shuttle the carriage twice so that it sits over the table.
2.
Clean the bulk of the ink in the drip pan with a lint free
wipe.
3.
Use a lint free wipe with flush to finish cleaning the
tray and wiper.
4.
Return the carriage to the home position.
5.
Raise the carriage.
6.
Wipe each head with a clean, lint free wipe.
7.
Wipe the jet plate.
8.
Lower the carriage.
9.
Put the printer in sleep mode.
Document ID: OMM-00174 Rev. D
Figure 6-5 Test Settings Window
Pro 30f Operations Guide
Printer Operations
49