IMPORTANT
• Set the paper size so that the following conditions are met:
- The total of the paper width, left gap, and right gap is 28.4 mm (1.12 inch) or more.
-
The total of the left margin and left gap or the total of the right margin and right gap is 3.5 mm (0.14 inch) or more.
● Label/Marker
This is a type of label paper with marks printed on its back surface. The printer recognizes the leading edge of
the paper by detecting the marks.
Cutting position
Left margin
Transport
direction
Mark length
Cutting position
Cutting position
*1
Paper length: Length from the center of a mark to the center of the next mark
*2
Top margin (bottom margin):Total of the half of the mark length and the top (bottom) margin of the label
Paper width
Paper length*1
Top margin*2
Bottom margin*2
Left margin
Right margin
Mark length
Top margin
*2
Mark
Bottom margin
*2
Paper width
28.4 mm to 63.0 mm (1.12 inch to 2.48 inch)
25.4 mm to 400.0 mm (1.00 inch to 15.75 inch)
1.5 mm to (Paper length - 1.0 - Bottom margin) mm
(0.06 inch to (Paper length - 0.04 - Bottom margin) inch)
1.5 mm to (Paper length - 1.0 - Top margin) mm
(0.06 inch to (Paper length - 0.04 - Top margin) inch)
3.5 mm to (Paper width - 1.0 - Right margin) mm
(0.14 inch to (Paper width - 0.04 - Right margin) inch)
3.5 mm to (Paper width - 1.0 - Left margin) mm
(0.14 inch to (Paper width - 0.04 - Left margin) inch)
3.0 mm to 6.4 mm (0.12 inch to 0.25 inch)
Printing with the Custom Paper Size
Label
Print area
Right margin
Paper length
*1
47