Table of Contents
Advertisement
Chapter 5 Appendix
3
IMPORTANT
• During execution of [Moving The Printer], observe the following precautions:
- Do not turn the printer off.
- Do not open/close the ink tank cover and transport unit lever.
- Do not operate any other component of the printer.
NOTE
• If the message "Maintenance cartridge full" appears, replace the maintenance cartridge with a new one, and then
click [Retry]. For how to replace the maintenance cartridge, see
3
Check that the execution of [Moving The Printer] has been completed.
1
4
Turn the printer off.
IMPORTANT
• Do not remove the power plug from the outlet when the power lamp is lit or blinking. A printer failure could
result.
5
Disconnect the power cord and interface cable.
176
(P.7)
3. Click [Yes].
Ink bleeding starts.
Do not operate the printer until after the
message indicating that the removal of ink is
completed appears.
"Replacing the Maintenance Cartridge (P.108)"
1. Click [OK].
Advertisement
Table of Contents
Troubleshooting
