Operation; Cleaning And Maintenance; Technical Specifications - cecotec ForceSilence 1030 SmartExtreme Instruction Manual

3. OPERATION

• Before using the fan make sure that it is on a flat and stable surface. Damage may occur if
it is placed on an unstable or uneven surface.
• Set all the switches to OFF position, then insert the plug directly into a standard socket-
outlet. Make sure the plug fits tightly into outlet.
1. Press the button
the default speed setting is 18.
2. Press the button
mode selected will activate the according light indicator.
3. Set the timer by pressing the button
from 1 to 18 hours. The pilot light corresponding to the selected operating time will light up.
4. For a greater air flow, press the
pilot light will turn off.
Rotate the control knob beside the control panel, you can change the fan speed. Rotate the knob
clockwise to increase the speed, and rotate the knob anti-clockwise to decrease the speed.
Note: all above functions can be operated from the remote control.

4. CLEANING AND MAINTENANCE

1. Always remove the plug from the socket-outlet and allow the fan to stop operating before
clean it.
2. Clean the external surfaces of the fan with a soft damp (not dripping wet) cloth.
WARNING:
• Do not immerse the fan in water.
• Do not use any cleaning chemicals such as detergents and abrasives.
• Do not allow the interior (special for the PCB) to get wet as this could create a hazard.
3. When the unit is not in use, make sure that it is unplugged from the wall socket. To store the
fan, you may pack it in the original carton and store it in a cool and dry place until later use.
4. In case of malfunction or doubt, do not try to repair the fan yourself, it may result in a fire
hazard or electric shock.

5. TECHNICAL SPECIFICATIONS

Product reference: 05211/05212
Model: ForceSilence 1030/1040 SmartExtreme
28 W, 220-240 V~50/60Hz
Made in China | Designed in Spain
to start and turn off the fan, the default mode setting is normal and
to select the desired air mode: Breeze, Eco, Night and Normal. The air
; to stop oscillating, just press this button again, the
to select the desired operating time, the range is