Flexcom TKSTAR TK906 Installation And Operating Instructions Manual page 11

Flexcom Communication Ltd
Setting up data traffic
If you want to operate the device not only via SMS, but also e.g. If you use the software tracking
service provided by your dealer, you must activate GPRS (Internet) data traffic and enter the
appropriate network settings. To do this, you need to send SMS messages from your phone to the
phone number of the SIM card inserted in the tracking device, as shown in the table below.
The factory-set access password for the tracking device in the commands: 123456
Setting
Turn on GPRS data
traffic
Enter the APN name
If your mobile network provider has not provided you with an APN username and password, you do
not need to send the following SMS messages to the tracking device!
APN username
APN password
Insert the SIM card
Only MICRO size SIM cards can be used with this product. If you have another type of
SIM, use a card adapter.
Insert the SIM card into the device as follows:
SMS message
gprs123456
apn123456(space)APN-name
APN names for domestic service providers in
Hungary: Telenor: online vagy net
Telekom: internet
Vodafone:
- in case of subscription: internet.vodafone.net
- in the case of a top-up card:
vitamax.internet.vodafone.net
Digi: internet
apnuser123456 APN-username
apnpasswd123456 APN-password
Installation and operating instructions (2021/10/17)
11/26
Device response
GPRS ok
apn ok
apnuser ok
apnpassword ok