Advertisement
⚫ Do not put any objects inside the tube and inside the tool.
⚫ Before using the product and after any shock, please check it for signs of wear or
damage.
⚫ Please carry out repairs if necessary.
⚫ Inspect and regularly service the product. Repairs should be carried out only by
an authorized service center or a similarly qualified specialist.
⚫ Children should not play with plastic bags, sheets and small parts! Keep them out
of the reach of children. There is a danger of swallowing and suffocation!
⚫ Do not use the product on a slippery surface.
⚫ Do not use the product on steep, slippery slopes. If you need to work on slopes,
use an extreme care and be careful about your footing. Please wear non slippery
footwear.
⚫ When planning your work schedule, allow enough time for rest. Limit continuous
use of the device, e.g. use 30 ~ 40 minutes per session, and take 10 ~ 20
minutes of rest between work sessions. Work a maximum of two hours per day.
⚫ Do not connect a damaged cord to supply or touch a damaged cord before it is
disconnected from the supply; damaged cords can lead to contact with live parts.
⚫ Keep extension cords away from moving hazardous parts to avoid damages to
the cords which can lead to contact with live parts.
⚫ When a cable is damaged or entangled, please stop immediately to use the tool.
Switch off the tool, let it cool and unplug it in a secure way.
⚫ When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric
shock.
⚫ Use extra care when using on stairs.
⚫ In dusty conditions, slightly dampen surfaces or use mister attachment if
available
⚫ Use the full blower nozzle extension so the air stream can work closer to the
ground
⚫ Never use the appliance for spreading chemicals, fertilizer, or any other
substances that may contain toxic materials. Do not use appliance as a sprayer
of flammable liquids.
⚫ Keep all the air intakes and the blower tube free of dust, lint, hair and other
material that may cause a reduction in air flow.
⚫ Do not switch on the tool in enclosed or poorly ventilated spaces or in the
presence of inflammable and/or explosive substances such as liquids, gasses,
and powders.)
⚫ Disconnect electrical supply before opening inlet cover or installing pick up tubes.
Never operate unit without inlet cover secured or pick-up tubes in place.
⚫ Always inspect the area before starting the appliance to remove debris and hard
or sharp objects that can be blown or cause damaged during operation
⚫ Never operate this appliance when you are tired, ill or under the influence of
alcohol, drugs or medication.
⚫ Always run the appliance with the blower tubes attached to the unit.
⚫ Always work moving away from solid objects such as walls, large stones,
automobiles and fences.
⚫ Clean spaces with corners by starting in corners and moving outward to straight
areas to prevent an accumulation of debris, which could fly into face.
⚫ Be careful when working near valuable plants. The force of air could damage
tender plants.
6
Advertisement
