Advertisement
-
Hold the machine by the handle. Walk and hold the tube just above the ground and blow the
debris.
-
Switch on the tool by pushing and holding the ON/OFF switch.
-
Work in order to gather the debris in one or more lots. Use the vacuum mode to collect the
heap. You can also pick up the pile of debris with a broom (or rake) and a shovel.
-
When the operation is finished, release the ON/OFF switch.
-
Throw away the debris in a trash bin.
e. Vacuum mode
-
Inspect the work area before starting. Remove any debris or objects that could be thrown or
those that can get caught or obstruct the device.
-
Put the shoulder strap.
-
Push up the lever to choose the vacuum mode.
-
Make sure that the collect bag is fitted properly.
-
Switch on the tool by pushing and holding the ON/OFF switch.
-
Put the tube to the ground without putting it in the debris. Move while sucking debris
-
When the collection bag is filled, stop working and empty the bag.
When the collect bag is full, the vacuum power will be greatly reduced. When this happens,
turn the switch to position "1" and disconnect the plug from the electricity supply. Wait until
the suction fan has stopped completely before operation. Open the zip fastener inside the bag;
spread out the opening and empty it completely. If you have collected only leaves or vegetable
matter, they will already have been shredded and will be ready for composting. Zip up the bag
and resume work.
Note: Before re-fitting the bag, clean the inside of the exhaust opening, removing any
shredded deposits. Pay special attention to the cleaning of the supporting edges of the air
flow deviator on the inside of the tube.
13
Advertisement
