Adjusting Equalizer Curves; Fine Adjusting Equalizer Curve - Pioneer KEH-P7035 Operation Manual

Audio Adjustments
% Press EQ to select the equalizer.
Press EQ repeatedly to switch between the fol-
lowing equalizer:
SUPER BASSPOWERFULNATURAL
VOCALCUSTOM1CUSTOM2FLAT

Adjusting equalizer curves

You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer
curve settings are memorized in CUSTOM1 or
CUSTOM2.
1 Press AUDIO to select EQ.
Press AUDIO until EQ appears in the display.
2 Press c or d to select the equalizer
band to adjust.
Each press of c or d selects equalizer bands
in the following order:
EQ Low (low)EQ Mid (mid)EQ High
(high)
3 Press a or b to adjust the level of the
equalizer band.
Each press of a or b increases or decreases
the level of the equalization band.
+6  6 is displayed as the level is increased
or decreased.
# You can then select another band and adjust
the level.
Note
If you make adjustments when a curve other than
CUSTOM2 is selected, CUSTOM1 curve is up-
dated.
HHHHHHHHHHHHHH
All manuals and user guides at all-guides.com

Fine adjusting equalizer curve

You can adjust the center frequency and the Q
factor (curve characteristics) of each currently
selected curve band (EQ Low/EQ Mid/
EQ High).
Level (dB)
Center frequency
1 Press AUDIO and hold until frequency
and the Q factor (e.g., F 80 Q 1W) appears
in the display.
2 Press AUDIO to select the desired band
for adjustment.
Press AUDIO repeatedly to switch between
the following bands:
LowMidHigh
3 Press c or d to select the desired fre-
quency.
Press c or d until the desired frequency ap-
pears in the display.
Low: 4080100160 (Hz)
Mid: 2005001k2k (Hz)
High: 3.15k8k10k12.5k (Hz)
4 Press a or b to select the desired Q fac-
tor.
Press a or b until the desired Q factor ap-
pears in the display.
2N1N1W2W
Note
If you make adjustments when a curve other than
CUSTOM2 is selected, CUSTOM1 curve is up-
dated.
Section
Q=2W
Q=2N
Frequency (Hz)
25
En
07