Introduction; Fsm7326P Front Panel And Leds - NETGEAR ProSafe FSM7326P Hardware Installation Manual

The NETGEAR Layer 3 Managed Fast Ethernet Switch is a state-of-the-art, high-
performance, IEEE-compliant network solution. It includes powerful
management features that you can use to eliminate bottlenecks, boost
performance, and increase productivity.
This guide describes the hardware for the following NETGEAR switches:
• ProSafe 24 Port 10/100 L3 Managed Switch with 2 Gigabit Ports and PoE
FSM7326P
• ProSafe 12 Port Gigabit L3 Managed Switch Model GSM7312
• ProSafe 24 Port Gigabit L3 Managed Switch Model GSM7324
These switches can be free-standing or rack-mounted in a wiring closet or an
equipment room. For information about features for each product, see the
NETGEAR Web site at http://www.netgear.com.

FSM7326P Front Panel and LEDs

The following figure shows the front panel of the FSM7326P. The front panel
contains LEDs, RJ-45 jacks, SFP module bays, and a console port.
LEDs
Figure 2-1

Introduction

RJ-45 jacks
v1.0, March 2006
Chapter 2
Introduction
Console
SFP module bays
port
2-1