Default Configuration Settings - NETGEAR ProSafe FSM7326P Hardware Installation Manual

This appendix provides the default settings for the NETGEAR Model FSM7326P,
GSM7312, and GSM7324 switches.
Table B-1. Default Configuration Settings
Features
Port speed
Port duplex
MTU (packet size)
Flow control (full duplex)
Broadcast storm control
Gigabit port type
Management IP
configuration
Password protection
User name
Password
Web access
Java mode
VLAN
Port access control
IP multicast filtering
Spanning Tree Protocol
Traffic prioritization
MAC address aging
SNMP community
Admin Edge port
Link aggregation

Default Configuration Settings

Default Configuration Settings
FSM7326P GSM7312
Auto-negotiation
Auto-negotiation
1518 (1522 with VLAN tagging)
Disabled
Enabled
Auto-detect
DHCP enabled
Disabled
Admin
(none)
Enabled
Enabled
All ports belong to default VLAN (VLAN 1) as
untagged ports
Disabled
Disabled
Enabled (IEEE 802.1s)
DiffServ disabled
300 seconds
public read-only, private read/write
Enabled
Disabled
v1.0, March 2006
Appendix B
GSM7324
B-1